Moderators: pedja089, stojke369, [eDo], trax
ili tebe oni j***u 
pa češ vidjet kako nam je..
. 
Inače, i od mene sve 5+ za tebe. 
ima ih hrpa ovdje, samo pogledat... npr ovdjefrwgrg wrote:Jeb*es te ekrane, jel ima neko neki laki i brzi tutor kako da sa pic-om pokrenem 7 segmentni display?
To je malo slozeniji posao jer nemas datasheet takvog displeya. mozda neko zna opisat kako to radi, ne bih znao...frwgrg wrote:imam ih na gomile, uglavnom iz bacenih digitrona i nekoliko iz videa. E da, a jel moze da se iskoristi onaj lcd iz kineskog tetrisa? on je takodje sa tackicama, a i cena mu je bar 5 puta jeftinija od bilo kog displeya, i gratis dobijete tetris.
Code: Select all
/*
Nokia 3310 LCD Demo. Codes are partially modified from Michel
Bavin's CCS C Codes for Nokia 3310 Graphical LCD
(LPH7779) routines version 3 from http://users.skynet.e/bk317494/
This is a HiTech C demo code for the PCD8544 controller based
Graphical LCD which is implemented on Nokia 3310 Cellphones.
*/
#define SCK GPIO.GP5 // ConnectPions between PIC and LCD.
#define SDI GPIO.GP4
#define D_C GPIO.GP0
//#define _SCE PORTD.F4
#define _RES GPIO.GP1
void initlcd(void); // Initializes the LCD.
void writecom(char); // Writes a command.
void writedata(char); // Writes data to DDRAM to illuminate the pixels.
void clockdata(char); // Clocks in data into the PCD8544 controller.
void clearram(void); // Erase the DDRAM contents.
void cursorxy(char,char); // Position cursor to x,y.
void putchar(char); // Write one character.
void putstr(const char *); // Writes a string of characters.
//1__CONFIG(PWRTDIS & DUNPROT & UNPROTECT & BORDIS & WDTDIS & LVPDIS & HS);
const char table[480] = { 0x00,0x00,0x00,0x00,0x00, // 20 space ASCII table for NOKIA LCD: 96 rows * 5 bytes= 480 bytes
0x00,0x00,0x5f,0x00,0x00, // 21 ! Note that this is the same set of codes for character you
0x00,0x07,0x00,0x07,0x00, // 22 " would find on a HD44780 based character LCD. :)
0x14,0x7f,0x14,0x7f,0x14, // 23 # Also, given the size of the LCD (84 pixels by 48 pixels),
0x24,0x2a,0x7f,0x2a,0x12, // 24 $ the maximum number of characters per row is only 14. :)
0x23,0x13,0x08,0x64,0x62, // 25 %
0x36,0x49,0x55,0x22,0x50, // 26 &
0x00,0x05,0x03,0x00,0x00, // 27 '
0x00,0x1c,0x22,0x41,0x00, // 28 (
0x00,0x41,0x22,0x1c,0x00, // 29 )
0x14,0x08,0x3e,0x08,0x14, // 2a *
0x08,0x08,0x3e,0x08,0x08, // 2b +
0x00,0x50,0x30,0x00,0x00, // 2c ,
0x08,0x08,0x08,0x08,0x08, // 2d -
0x00,0x60,0x60,0x00,0x00, // 2e .
0x20,0x10,0x08,0x04,0x02, // 2f /
0x3e,0x51,0x49,0x45,0x3e, // 30 0
0x00,0x42,0x7f,0x40,0x00, // 31 1
0x42,0x61,0x51,0x49,0x46, // 32 2
0x21,0x41,0x45,0x4b,0x31, // 33 3
0x18,0x14,0x12,0x7f,0x10, // 34 4
0x27,0x45,0x45,0x45,0x39, // 35 5
0x3c,0x4a,0x49,0x49,0x30, // 36 6
0x01,0x71,0x09,0x05,0x03, // 37 7
0x36,0x49,0x49,0x49,0x36, // 38 8
0x06,0x49,0x49,0x29,0x1e, // 39 9
0x00,0x36,0x36,0x00,0x00, // 3a :
0x00,0x56,0x36,0x00,0x00, // 3b ;
0x08,0x14,0x22,0x41,0x00, // 3c <
0x14,0x14,0x14,0x14,0x14, // 3d =
0x00,0x41,0x22,0x14,0x08, // 3e >
0x02,0x01,0x51,0x09,0x06, // 3f ?
0x32,0x49,0x79,0x41,0x3e, // 40 @
0x7e,0x11,0x11,0x11,0x7e, // 41 A
0x7f,0x49,0x49,0x49,0x36, // 42 B
0x3e,0x41,0x41,0x41,0x22, // 43 C
0x7f,0x41,0x41,0x22,0x1c, // 44 D
0x7f,0x49,0x49,0x49,0x41, // 45 E
0x7f,0x09,0x09,0x09,0x01, // 46 F
0x3e,0x41,0x49,0x49,0x7a, // 47 G
0x7f,0x08,0x08,0x08,0x7f, // 48 H
0x00,0x41,0x7f,0x41,0x00, // 49 I
0x20,0x40,0x41,0x3f,0x01, // 4a J
0x7f,0x08,0x14,0x22,0x41, // 4b K
0x7f,0x40,0x40,0x40,0x40, // 4c L
0x7f,0x02,0x0c,0x02,0x7f, // 4d M
0x7f,0x04,0x08,0x10,0x7f, // 4e N
0x3e,0x41,0x41,0x41,0x3e, // 4f O
0x7f,0x09,0x09,0x09,0x06, // 50 P
0x3e,0x41,0x51,0x21,0x5e, // 51 Q
0x7f,0x09,0x19,0x29,0x46, // 52 R
0x46,0x49,0x49,0x49,0x31, // 53 S
0x01,0x01,0x7f,0x01,0x01, // 54 T
0x3f,0x40,0x40,0x40,0x3f, // 55 U
0x1f,0x20,0x40,0x20,0x1f, // 56 V
0x3f,0x40,0x38,0x40,0x3f, // 57 W
0x63,0x14,0x08,0x14,0x63, // 58 X
0x07,0x08,0x70,0x08,0x07, // 59 Y
0x61,0x51,0x49,0x45,0x43, // 5a Z
0x00,0x7f,0x41,0x41,0x00, // 5b [
0x02,0x04,0x08,0x10,0x20, // 5c Yen Currency Sign
0x00,0x41,0x41,0x7f,0x00, // 5d ]
0x04,0x02,0x01,0x02,0x04, // 5e ^
0x40,0x40,0x40,0x40,0x40, // 5f _
0x00,0x01,0x02,0x04,0x00, // 60 `
0x20,0x54,0x54,0x54,0x78, // 61 a
0x7f,0x48,0x44,0x44,0x38, // 62 b
0x38,0x44,0x44,0x44,0x20, // 63 c
0x38,0x44,0x44,0x48,0x7f, // 64 d
0x38,0x54,0x54,0x54,0x18, // 65 e
0x08,0x7e,0x09,0x01,0x02, // 66 f
0x0c,0x52,0x52,0x52,0x3e, // 67 g
0x7f,0x08,0x04,0x04,0x78, // 68 h
0x00,0x44,0x7d,0x40,0x00, // 69 i
0x20,0x40,0x44,0x3d,0x00, // 6a j
0x7f,0x10,0x28,0x44,0x00, // 6b k
0x00,0x41,0x7f,0x40,0x00, // 6c l
0x7c,0x04,0x18,0x04,0x78, // 6d m
0x7c,0x08,0x04,0x04,0x78, // 6e n
0x38,0x44,0x44,0x44,0x38, // 6f o
0x7c,0x14,0x14,0x14,0x08, // 70 p
0x08,0x14,0x14,0x18,0x7c, // 71 q
0x7c,0x08,0x04,0x04,0x08, // 72 r
0x48,0x54,0x54,0x54,0x20, // 73 s
0x04,0x3f,0x44,0x40,0x20, // 74 t
0x3c,0x40,0x40,0x20,0x7c, // 75 u
0x1c,0x20,0x40,0x20,0x1c, // 76 v
0x3c,0x40,0x30,0x40,0x3c, // 77 w
0x44,0x28,0x10,0x28,0x44, // 78 x
0x0c,0x50,0x50,0x50,0x3c, // 79 y
0x44,0x64,0x54,0x4c,0x44, // 7a z
0x00,0x08,0x36,0x41,0x00, // 7b <
0x00,0x00,0x7f,0x00,0x00, // 7c |
0x00,0x41,0x36,0x08,0x00, // 7d >
0x10,0x08,0x08,0x10,0x08, // 7e Right Arrow ->
0x78,0x46,0x41,0x46,0x78}; // 7f Left Arrow <-
void main() {
//int i;
TRISIO = 0x00;
//TRISIO = 0b00000111; // All SCK, SDI, D_C, _SCE and _RES are output pins.
initlcd();
cursorxy(22,0); // Next line.
putstr("Danijel"); // A test message.... Also a new year's greeting. :)
//cursorxy(18,1); // Next line.
//putstr("Zelenika");
//TRISIO = 0x00; // PORTB is output
// GPIO.GP1 = 1;
}//~!
void initlcd(void)
{
_RES = 1; // Set _RES HIGH.
//_SCE = 1; // Disable Chip.
_RES = 0; // Reset the LCD.
Delay_ms(100); // Wait 100ms.
_RES = 1; // Awake LCD from RESET state.
writecom(0x21); // Activate Chip and H=1.
writecom(0xC2); // Set LCD Voltage to about 7V.
writecom(0x13); // Adjust voltage bias.
writecom(0x20); // Horizontal addressing and H=0.
writecom(0x09); // Activate all segments.
clearram(); // Erase all pixel on the DDRAM.
writecom(0x08); // Blank the Display.
writecom(0x0C); // Display Normal.
cursorxy(0,0); // Cursor Home.
}
void writecom(char command_in)
{
D_C = 0; // Select Command register.
// _SCE = 0; // Select Chip.
clockdata(command_in); // Clock in command bits.
// _SCE = 1; // Deselect Chip.
}
void writedata(char data_in)
{
D_C = 1; // Select Data register.
// _SCE = 0; // Select Chip.
clockdata(data_in); // Clock in data bits.
// _SCE = 1; // Deselect Chip.
}
void clockdata(char bits_in)
{
int bitcnt;
for (bitcnt=8; bitcnt>0; bitcnt--)
{
SCK = 0; // Set Clock Idle level LOW.
if ((bits_in&0x80)==0x80) {SDI=1;} // PCD8544 clocks in the MSb first.
else {SDI=0;}
SCK = 1; // Data is clocked on the rising edge of SCK.
bits_in=bits_in<<1; // Logical shift data by 1 bit left.
}
}
void clearram(void)
{
int ddram;
cursorxy(0,0); // Cursor Home.
for (ddram=504;ddram>0;ddram--) {writedata(0x00);} // 6*84 = 504 DDRAM addresses.
}
void cursorxy(char x, char y)
{
writecom(0x40|(y&0x07)); // Y axis
writecom(0x80|(x&0x7f)); // X axis
}
void putchar(char character)
{
int tablept, count, char_column;
if ((character<0x20)||(character>0x7f)) {return;} // Exit function if character is not found.
tablept = ((5*character) - 160); // Point to the columns of the character in the table.
for (count=5;count>0;count--) // Draw the columns to print the character.
{
char_column = table[tablept];
writedata(char_column);
tablept++;
}
writedata(0x00); // 1 pixel spacing per character.
}
void putstr(const char *s)
{
while(*s) {putchar(*s++);} // Points to one ASCII to be written one at a time.
}