Jesi li probao Hiren'sBootCD!?
Mozes ga prebaciti na USB stapic!
Ne znam da li ce pomoci pri instalaciji(nisam probao), ali trebalo bi jer ima sve najpotrebnije alate za PC na jednom mestu,a jos je i boot-abilan!!!!!!!
Evo uputstva kako, sa svim potrebnim za pravljenje bootUSBa, sem samog Hiren'sBootCDa:
http://www.badongo.com/file/4151121
ili
http://spadayu.badongo.com/
Najnoviji Hiren'sBootCD mozes skinuti ovde:
http://soft.softoogle.com/ap/hiren-s-bo ... 6916.shtml
http://www.9down.com/Hiren-s-BootCD-9-2-14520/
ili torent
http://www.mininova.org/tor/821088
Evo i teksta iz uputstva bez pratecih datoteka:
1.ubaci Hirens.BootCD.8.8_9 disk
2.extract-boot-files iskoristi da dobijes c:\USB
3.raspakuj win98-dos.zip i presnimi sadrzaj u c:\USB
4.pokreni usb_format.exe i otkaci FAT, upisi labelu BOOTCD_USB i postavi putanju c:\USB i formatiraj
5.iskopiraj sadrzaj c:\USB na USB drive; presnimi sve jedno preko drugoga sem IO.sys
6.prekopiraj BootCD direktorijum sa Hirens.BootCD.8.8_9 diska
7.proveri da li radi! U BIOS-u namesti da je prvi uredjaj sa koga pokrece sistem USB-ZIP!
Dovoljno je samo raspakovati USB.zip i tako izbeci korake 1-3!!!
(USB.zip napravljeno sa Hirens.BootCD.8.8_9, pa mozda nece raditi sa drugom verzijom, tj. moraces sam da napravis C:\USB za tvoju verziju)
Make sure you set your computer to boot from USB Flash Drive
To Enter the BIOS press the "Del" button on your keyboard. Alternatives are "F1", "F2", "Insert", and "F10". Some PC's BIOS might even require a different key to be pressed. Commonly a PC will show a message like "Press [Del] to enter Setup" to indicate that you need to press the "Del" key. Some AMI BIOS require you to enable the option "USB Keyboard Legacy support"!
For AMI BIOS:
* Go to "Feature Setup". "Enable" these options: "USB Function Support",
"USB Function For DOS" and "ThumbDrive for DOS". Go to "Advanced Setup".
Set the "1st Boot Device" to "USB RMD-FDD".
Reboot the PC and it now should boot from the Usb Stick.
* Go to "USB Mass Storage Device Configuration". Select "Emulation Type"
and set it to "Harddisk". Go to the "Boot Menu" and set the "1st boot device" to "USB-Stick". Exit the BIOS, saving the changes.
you can try "Emulation Type" to "Floppy" or "Forced FDD".
For PHOENIX/AWARD BIOS:
* Go to "Advanced BIOS Features". Go to the "1st Boot device" and set it to "USB-ZIP".
Pozdrav,
Spadayu