Elektronika.ba

In which part of the program do I need to change the code to get constant light instead of blinking? And what do you think about the C13 capacitor?

Hi,trax! I have a question. When you turn on the clock, green leds start blinking . I want them to light without blinking and also it will be good if the color of leds is able to be changed to any other. Also I wonder if we can backlight the date. And also I want to know if we can use bigger value o...

Hi,Trax!!!!! I have goooood news.My clock finally works.The problem was with PCB.Manufacturer of PCB made 5 shortcut circuits.
Do you have user manual for 1 version?

Let me know how it works! Hello,trax!I conducted a study, and that's what found. Do not work only numbers 0,2,5,9, and all other work. In the photo, which I showed these figures are lit all at once. I think there is a problem in the anode timings. With operating numbers are coincide but with no wor...

trax wrote: Upload screenshot of your problem so I can see it.

My photo is in the archive.

Hi Trax. Yes, I found a place where you need to change the table of connection pins 74 141, and changed for his board. He gathered all AVR Studio 5, and when compiled, will receive an error, see the photo. How to fix it? http://s018.radikal.ru/i526/1507/48/80aa5cd54b0ft.jpg Maybe you can help me com...

You write:

trax wrote:You need wt1.c and wt1.h files.

,but I have just wt.c and wt.h files from your site .This is equivalent to?

I don't have Dip Trace. Do you have AVR Studio? You should install it, and re-compile the firmware to create your own HEX file Yes, I have AVR Studio. But I have never written a program. :roll: I only know how to write the final software, but I'll try. If you do help me.:) and fix the SN74141 codes...

I think that the problem is in the header-file (wt1.h). I think the same. My friends also said that the problem is not the right code at the entrance sn74141. That code is sent more than 9 digits. I don't know what Nixie pin you soldered to which SN74141 pin The most interesting thing that I connec...

I soldered everything well. LEDs work properly.
This is the link to my video: https://youtu.be/PVUijO9rjLM
Bipper doesn't work when you press buttons. Also clock doesn't measure the temperature. Buttons work from time to time and it's hard to understand when exactly.

Hi! I did this project nixie clock. But I made an version v1. Can you help me? Here is my problem:... not everything works. Leds are flashing green , lamp always shows 44: XX (xx is all light instead of numbers), then changed to XX: 1, and nothing changes when you press the button. Maybe there's ano...