komentar [58]
- Napisao trax na datum 20-10-2009 u 18:36:49
Click on the red "download" button above.
IP: n/a
GSM call alarm je uređaj koji za zvanje odredišnog broja koristi Siemens ili Ericsson GSM telefon (19200 bauds RS232) i ima 1 senzorski ulaz i još jedan ulaz - stanje. Ukoliko je stanje = 0V tada je uređaj "aktivan" i prati stanje senzorskog ulaza. Uređaj se "deaktivira" otpajanjem on/off (stanje) ulaza sa mase (0V) ili spajanjem na + pol napajanja. Senzorski ulaz takođe reaguje na 0V.
In .rar file you will find JPG file that contains a description how to program the telephone number which this device will call upon alarm condition.
Autor (poslao): Trax
Broj download-a: 28,875
Ocjena: (2.94, glasova 6244)
Datum: 20-02-2005
English version of this page: GSM call alarm
hi, Trax. Thanks you for the great idea, but I have a problem with the device.
I make everything exactly like it you write it, but the problem is the phone coverage - the
telephone is searching for network cell at every 15 sec. If something hapenned during this
time, the phone /seimens C35i/ will not be ably to dial my nomber to notice me about alert. I
used the newest version of software /hex fail- dailing only once/. Any idea what can i do to
make it work?
IP: n/a
Click on the red "download" button above.
IP: n/a
Please tell me where I can find out a schematic diagram for GSM alarm.
Sincerelly your Petar
IP: 88.85.120.140
Hello! I cannot sell you boards because I don't have time to make them. You must do this
yourself! In a few days I will publish new version of GSM alarm SMS/CALL in one device. When
you connect your phone, LEDs will be OK.
IP: n/a
Dear Trax ! I think you have many mini board working ok ! Then I need a board : phone line
alarm,phone line control,and GSM alarm. Can you do and sell it for me. I will pay for you over
Banking. Thanks alot !
IP: n/a
Thanks Trax alot ! I will try some old phone siemens o sony ericsons. But I want know your idea
about my board . I don't known why Red -yellows led is on same time when i connect board to
power . Power 12VDC 800mA is OK ? Thank Trax very very much! I wish you come VietNam then I can
see you!
IP: n/a
You can not use Nokia with this (maybe you can, but I didn't try). You better find Siemens M35
or similar phone.
IP: n/a
Hi Trax ! I'm a beginer in electric.I'm From Vietnam. I building this project but I have some
problem : I use nokia3120( I don't have siemens or sony ericsons). When I made complete board
follows your guide,supply power 12VDC,800mmA. Yellows led and red led is always on.Please help
me about this. I use some 10K resistor 1\%,and 220 ohm,4k7,47k is 5\%,C47uF16V, 10Mhz Kristal
oscillo...Thank alot !
And this one : I'm beginer, and SMD components is difficul for me. Please designs for socket
components.
IP: n/a
Hello Trax! Thanks a lot! I tried out this new hex file and it is working super now.
Thank you again!!!
IP: n/a
I placed this additional HEX in RAR file. Postavio sam ovaj dodatni HEX fajl u RAR-u za
download.
IP: n/a
To možeš uraditi na forumu: Login stranica. Kada se ulogiraš, vrati se na ovu stranicu i uradi refresh.